Gundam Eclipse
Cluster of bright red ripe tomatoes on the vine against a blurred green background

A community for builders of all skill levels — share finished builds, works in progress, kit reviews, and stay up to date with forum announcements.

Browse the Display Case

Stay Connected

Get the latest from the Gundam Eclipse community delivered to your inbox.

Latest from the Forum

Gundam Eclipse is Moving!

September 26, 2018 — by tc012009

An important announcement was posted in GE Forum News regarding the future of the community. The forum had accumulated 240 topics and approximately 1,900 posts in its announcements section by this time.

  • Posted in GE Forum News
  • Final recorded announcement in the section

Moderoid 1/60 SAVAGE CROSSBOW

The ultimate guide to Gundam panel lining methods

Panel lining gives a Gundam model definition, scale, and visual depth. The recessed grooves on armor may look subtle on the runner, but a carefully applied panel line can make a finished mobile suit appear sharper and more mechanical.

There is no single best panel wash for every kit. Plastic color, surface finish, line depth, paint type, and desired style all affect the result. A clean anime-inspired build may need only a few restrained marks, while a realistic military-style Gunpla benefits from layered shading and grime.

The most reliable approach is to treat panel lining as part of the full painting process rather than a final decoration. Choosing the right medium, preparing the surface, and removing excess carefully will produce cleaner results with less risk to the plastic.

Choosing the right panel lining medium

Fine-tip panel lining markers are accessible and fast. Gray works well on white armor, brown adds warmth to cream or red parts, and black creates strong contrast on dark blue or gray armor. Gundam markers are especially useful for beginners because they require little equipment and can be applied directly to the assembled model.

Enamel washes and oil-based products flow farther through recessed details, making them valuable for large-scale kits and complex mechanical sections. Their solvents can damage bare polystyrene, particularly around stressed joints, so apply them over a lacquer or acrylic gloss coat whenever possible.

Acrylic panel washes are generally easier to control and clean with water or the appropriate acrylic thinner. They may require more deliberate placement because they do not always flow as freely as enamel. Test every product on spare runners before using it on a valuable kit.

Preparing parts for clean results

Begin by removing nub marks and sanding the parts smoothly. A rough surface can trap pigment and create dark halos around the groove. Washing the parts with mild soap removes mold-release residue, skin oils, and sanding dust that might interfere with adhesion.

A gloss finish is ideal for flowing washes. Its smooth surface lets the liquid travel through recessed details and makes cleanup easier. If you prefer a flat or satin appearance, apply that finish after panel lining and decal work.

Deep lines should receive a small amount of product rather than one heavy application. Touch the brush or marker to the edge of the groove and allow capillary action to pull the color along the detail. This method reduces flooding and keeps corners from becoming blotchy.

Comparing common panel lining methods

Your choice should reflect the kit’s material, the level of contrast you want, and how much correction you expect to do. A beginner-friendly method is often better than the theoretically strongest one if it encourages careful practice.

Method Best use Strengths Main caution
Fine-tip marker Quick builds and small details Simple, portable, fast Can look harsh or uneven
Pour-type marker Crisp recessed armor lines Excellent flow and speed Needs a protected surface
Acrylic wash Beginner-friendly cleanup Low odor and easy correction May need several passes
Enamel wash Realistic mechanical shading Strong capillary flow and rich tone Solvent can damage bare plastic
Mechanical pencil Subtle lines and small kits Precise, inexpensive, reversible Less durable and less dark
Scribed lines Custom or sharpened details Permanent, highly controlled Requires tools and practice

For most high-grade kits, a gray or dark brown line creates enough definition without overpowering the sculpt. Reserve pure black for deep vents, inner frames, and dramatic color schemes. On a Real Grade or Master Grade kit, several tones can separate armor, frame, and weapon details naturally.

Applying and cleaning a panel wash

Work in small sections and keep a cotton swab, pointed brush, or lint-free cloth nearby. If excess wash spreads outside the groove, remove it before it cures fully. For enamel products, use a swab barely moistened with odorless mineral spirits; too much solvent can strip the base coat or seep into joints.

Move the cleaning tool across the line rather than directly along it when you want to preserve the pigment in the recess. A fresh end of the swab prevents previously removed paint from being dragged back across the armor. For narrow corners, a sharpened cotton bud or fine brush offers greater control.

Panel lining can also support a larger display concept. A weathered kit mounted on a scratched platform gains context through small marks, stains, and shadows, as shown in this custom action base guide.

Building realism with layered detail

Panel lines should support the model’s color separation rather than compete with it. Use lighter tones on white and yellow armor, medium gray on pale blue, and brown or black-brown on warm colors. Strong contrast is effective for stylized builds, but subtle tonal variation often looks more convincing in photographs.

After the main lines are complete, add restrained secondary details: small maintenance hatches, bolt heads, vents, and armor breaks. Decals can reinforce scale, while a final satin or matte coat unifies the finish. Avoid applying a heavy clear coat over wet or uncured lining, since it may smear the pigment.

For a grounded, realistic presentation, study how panel lines interact with dust, scratches, and mud. The full military diorama demonstrates how mechanical definition becomes more convincing when it supports the environment around the mobile suit.

Fixing mistakes without losing detail

Common problems include bleeding lines, shiny residue, broken marks, and overly dark armor. Many errors can be corrected by gently removing the affected area with the correct cleaner, then restoring the surface finish before trying again. Do not scrub aggressively, especially on sharp edges and painted parts.

If a line appears too strong, soften it rather than removing it completely. A thin layer of the base color, a lighter wash, or a controlled matte coat can reduce contrast. When lines disappear under a topcoat, reinforce only the most important recesses instead of repeating every mark.

For advanced weathering, enamel washes can become part of a broader grime effect. This enamel weathering tutorial explains how to build tonal depth while keeping the surface believable.

A practical workflow for better builds

Use the following routine to make panel lining consistent across different grades and styles:

  • Test the marker or wash on leftover runner plastic first.
  • Clean, sand, and inspect each part before applying color.
  • Protect painted surfaces with a suitable gloss coat.
  • Apply thin lines and remove excess in small sections.
  • Finish with a satin or matte clear coat after everything cures.

Take progress photos under the same lighting used for your Display Case images. They reveal uneven cleanup that may be difficult to see at the workbench and make it easier to compare different panel lining colors.

Share your next panel-lined build, work-in-progress experiment, or cleanup technique with the Gundam Eclipse community. Your results may give another builder the confidence to try a new wash, refine a marker method, or turn a simple kit into a more expressive display piece.

A member-contributed review of the Moderoid 1/60 SAVAGE CROSSBOW kit, published in the Gundam Eclipse Reviews section. The reviews area hosted 246 topics and roughly 1,400 posts.

PG 00 Gundam

November 4, 2018 — by heathorn

A completed Perfect Grade 00 Gundam build showcased in The Display Case. This section featured approximately 2,200 topics and 24,900 posts, making it one of the forum's largest galleries of finished work.

HG Zeta Gundam Evolution Project

2018 — by kajnrig

An ongoing High Grade Zeta Gundam customization project shared in the Work-in-Progress Thread. This was the most active section on the forum, with roughly 1,400 topics and 34,300 posts where members exchanged feedback and progress updates.