Create Custom Water Slide Decals With a Laser Printer
A custom water slide sheet can add unit markings, warning labels, faction symbols, sponsor logos, and original artwork to a Gundam or mecha model. With the right decal paper and a carefully prepared image, a standard color laser printer can produce sharp, durable markings without requiring professional printing equipment.
The process is straightforward, but the materials matter. Laser printers use toner, while inkjet printers use liquid ink, so the decal paper must be made specifically for laser printing. A clear protective coat, clean cutting, and a glossy model surface will determine whether the finished decal looks painted on or visibly raised.
For builders sharing techniques and finished projects, the Gundam Eclipse forum is a useful place to compare results, discuss printer settings, and find advice for unusual kits or custom markings.
Choose The Right Decal Paper
Laser waterslide paper is sold in clear and white versions. Clear paper is best when the design has transparent areas and will be placed over a light-colored part. White paper is necessary when the artwork includes white lettering or must remain opaque over a dark red, blue, black, or gray surface.
Check the package carefully before buying. Inkjet decal paper is not a suitable substitute because its coating is designed to absorb liquid ink. It may not bond correctly with laser toner and can produce blurred, weak, or unusable decals. Select paper that matches your printer’s paper path and maximum media thickness.
Prepare Artwork At Model Scale
Create the design in a vector program when possible. Vector artwork keeps small symbols and text crisp during resizing, while a high-resolution raster file can work well for more complex graphics. Set the document to the final physical size rather than relying on printer scaling later.
Measure the destination panel on the model and leave a small margin around each marking. Make several copies of important decals in slightly different sizes. This gives you a backup if one tears, folds, or proves too large after application.
Remember that a clear decal sheet cannot print white. Any white area in the file will usually remain transparent, allowing the plastic or paint beneath it to show through. For white symbols, use white decal paper or redesign the artwork with a contrasting outline.
Print A Clean Test Sheet
Before loading the specialty sheet, print the design on ordinary paper. Check the scale, orientation, color balance, and spacing. A sheet that looks correct on screen can still produce markings that are too large for a shoulder armor panel or too small for a shield.
Use the printer’s highest suitable quality setting and disable automatic “fit to page” options. Feed one decal sheet at a time if the printer manual recommends single-sheet feeding. Print on the coated side, which is usually smoother or more visibly prepared than the backing side.
Allow the toner to cool before handling the print. Laser toner is heat-fused to the surface, but aggressive rubbing, bending, or scraping can still damage fine lines. If the color appears weak, adjust the artwork or printer settings rather than repeatedly sending the same sheet through the printer.
| Choice | Best Use | Main Advantage | Important Limitation |
|---|---|---|---|
| Clear laser decal paper | Light armor and transparent designs | Minimal visible film | Cannot provide opaque white |
| White laser decal paper | Dark parts and white markings | Strong, solid colors | Requires close trimming |
| Glossy clear coat | Protecting printed artwork | Reduces toner loss and edge damage | Must be applied in light coats |
| Matte clear coat | Final finish on flat armor | Matches non-glossy surfaces | Can make decals look cloudy if applied too heavily |
| Glossy model surface | Decal application | Reduces silvering and trapped air | May need a later matte finish |
Seal, Trim, And Organize The Sheet
Some laser decal papers can be used without sealing, but a thin clear acrylic spray is a valuable safeguard. It protects the toner from scratching and strengthens the film during soaking. Apply several light passes rather than one wet coat, then let the sheet cure completely according to the product instructions.
Test the clear coat on a spare corner first. Certain sprays can soften the decal coating, cause cloudiness, or react with the printed colors. The Gundam Eclipse announcements can also help you keep track of community build events where a custom marking project might be useful.
Cut each decal as close to the artwork as practical, especially when using white paper. Excess clear film is less noticeable, but a wide white border can remain visible after application. Use a sharp hobby knife and a cutting mat, replacing the blade when it begins to drag.
Apply The Water Slide Decal
Paint or coat the model with a smooth gloss finish before applying the decals. A glossy surface reduces microscopic air pockets beneath the film, which are responsible for the cloudy “silvering” effect. Let the surface cure fully before adding water.
Place the cut decal in lukewarm water for the time recommended by the paper manufacturer. When the design begins to move on the backing, slide it gently onto the model rather than pulling it away with tweezers. Position it with a damp brush, then remove excess water with a soft cotton swab or folded tissue.
For curved armor, use a decal setting solution sparingly. A softening solution can help the film conform to panel lines and bends, but it may wrinkle the decal temporarily. Do not touch it while it is reacting; many wrinkles flatten as the film dries.
Protect The Finished Markings
Leave the model undisturbed until every decal is dry. Inspect the edges for lifting and press them down with a damp brush if necessary. Once the markings have set, apply a clear topcoat to protect them from handling and unify the surface sheen.
Choose gloss, satin, or matte according to the model’s finish. A satin or matte coat can make custom markings appear integrated with the armor, while a gloss coat suits polished sci-fi surfaces. Build the finish gradually with light sprays to avoid flooding panel lines or creating runs.
A Reliable Workflow
- Design markings at their real model scale and include spare copies.
- Print on laser-compatible clear or white waterslide paper.
- Test the layout on ordinary paper before using the decal sheet.
- Seal the print with light coats of compatible clear spray when needed.
- Apply decals over gloss, allow them to cure, and finish with a protective topcoat.
A custom water slide sheet using a laser printer is especially effective for original squadron symbols, warning stencils, and markings that are unavailable in commercial sets. Save the source file after printing so you can revise the size, color, or placement for a future build.
Share the finished result, application notes, and any printer-specific discoveries with fellow builders through the Gundam Eclipse community. A clear photograph of the decals on the completed kit can help others reproduce the technique and refine their own custom mecha projects.