Gundam Eclipse
Cluster of bright red ripe tomatoes on the vine against a blurred green background

A community for builders of all skill levels — share finished builds, works in progress, kit reviews, and stay up to date with forum announcements.

Browse the Display Case

Stay Connected

Get the latest from the Gundam Eclipse community delivered to your inbox.

Latest from the Forum

Gundam Eclipse is Moving!

September 26, 2018 — by tc012009

An important announcement was posted in GE Forum News regarding the future of the community. The forum had accumulated 240 topics and approximately 1,900 posts in its announcements section by this time.

  • Posted in GE Forum News
  • Final recorded announcement in the section

Moderoid 1/60 SAVAGE CROSSBOW

Building A Parkour Display Base With Foam And Glue

A convincing mecha display does more than place a mobile suit on a flat platform. A raised wall, broken ledge, or angled rooftop can suggest motion and give a finished model the visual energy of a parkour scene. Foam mats and adhesive offer an affordable way to build that environment without investing in specialized scenery materials.

This approach works especially well for Gundam kits because EVA foam is lightweight, easy to cut, and simple to texture. With a few careful layers, you can create platforms, rails, ramps, barriers, and damaged concrete that support dynamic poses while remaining stable enough for a Display Case photograph.

The project also scales well. A small base can showcase one 1/144 mobile suit, while a wider modular layout can hold several machines or be rearranged for different work-in-progress scenes.

Choosing Foam For The Structure

Interlocking exercise mats made from EVA foam are a practical starting point. Their thickness gives you enough material for stacked platforms, and the textured side can become a useful surface for industrial flooring or rough concrete. Smooth craft foam is better for thin panels, signs, trim, and smaller architectural details.

Look for dense, resilient foam rather than very soft camping foam. A firm sheet will accept cuts more cleanly and resist dents when you reposition a kit. Before building, wash the mats with mild soap and let them dry completely; manufacturing residue can weaken paint adhesion and make glue cure unevenly.

Sketch the scene from the mobile suit’s intended pose. A crouching Leo may need a broad landing pad, while a jumping figure benefits from a narrow wall or broken slab that leaves the limbs visible. The Leo accessory review offers useful inspiration for choosing equipment and poses that can guide the base’s scale.

Planning A Parkour Layout

Think of the base as a sequence of movement points rather than a single block. A low platform can lead to a higher wall, with a gap, pipe, or tilted slab connecting the visual path. Varying height makes the scene feel designed for momentum and gives the camera several strong angles.

Keep the model’s footprint in mind before gluing anything. Place the feet, support hand, or action stand where they will eventually sit, then mark those locations with a pencil. Leave enough clearance for weapons, shields, and backpack parts so the scenery does not hide the kit’s silhouette.

A removable section is valuable when experimenting. Build the main platform as a solid rectangle, then attach secondary elements as separate modules. This lets you change a sprinting pose into a landing pose without rebuilding the entire diorama.

Cutting And Joining The Pieces

Use a fresh hobby knife and a metal ruler for long, straight cuts. Several light passes are safer and cleaner than forcing the blade through thick foam in one stroke. For curves, make a cardboard template first, trace it onto the mat, and refine the edge with sanding foam or fine sandpaper.

PVA glue works for porous foam and large flat areas, but it dries slowly and may need weights to prevent curling. Foam-safe contact adhesive creates a stronger bond for load-bearing joints. Avoid ordinary solvent-based glues, since they can melt EVA foam and leave deep craters.

Apply adhesive sparingly. A thick bead can remain soft inside the joint and push pieces out of alignment. Press the parts together, wipe away excess, and use books, clamps, or masking tape to hold the connection while it cures. Test scrap pieces first, because different mats react differently to each formula.

Construction need Suitable material Useful adhesive Practical note
Main platform Dense EVA mat PVA or foam-safe contact glue Add a second layer underneath for rigidity
Thin wall panels Craft foam Contact adhesive Reinforce the rear with strips
Rails and pipes Plastic rod or dowel Super glue gel Anchor into drilled holes
Broken concrete Layered foam scraps PVA Tear edges for a chipped profile
Removable scenery Foam block with magnets Contact glue and magnets Keep magnets away from loose kit parts

Adding Texture And Damage

A parkour-style display base becomes convincing when its surfaces show how the environment is used. Score expansion joints into concrete panels, press a coarse stone into soft foam for pitting, and cut shallow grooves where boots or debris might have scraped the surface. Keep the deepest damage near edges and impact points so the wear has a visual reason.

For broken slabs, laminate two or three pieces and stagger the edges. Carve away sections instead of cutting every break into a perfect zigzag. A few exposed rods made from thin plastic or wire can suggest reinforced concrete, while small rubble pieces help connect the platform to the surrounding scene.

Rails, vents, warning stripes, and maintenance hatches provide scale cues. Use them selectively; too many details can compete with the mobile suit. The strongest bases usually have one dominant architectural feature, a secondary route for the eye, and enough open space to frame the pose.

Painting Without Losing The Foam

Seal the surface before applying color. Several thin coats of PVA diluted with water can reduce the foam’s absorbency, while a flexible acrylic primer provides a more even foundation. Avoid aerosol primers unless they are specifically labeled foam-safe, as many contain solvents that attack EVA.

Build the palette with acrylic paints: dark gray or brown in the recesses, a medium concrete tone across the main surfaces, and a lighter drybrush on raised edges. Industrial flooring can use muted blue-gray, olive, or rust-red panels to make the base feel different from a plain street scene.

Weathering should support the story of the pose. Add dust beneath the feet, darker grime around seams, and restrained rust near rails or exposed metal. A thin wash followed by selective drybrushing often gives better control than applying a heavy all-over effect.

Keeping The Display Stable

A lightweight foam base can shift when a large kit is posed on one leg. Glue the finished scenery to a thin MDF, acrylic, or rigid plastic sheet. This adds weight and prevents the platform from flexing when you move the display.

For especially active poses, drill shallow holes for brass rods or use a concealed action-base connector. If magnets are preferred, bury them beneath a thin foam layer and test their polarity before sealing the surface. The support should strengthen the pose without becoming the main feature of the scene.

Photograph the build from several heights before finalizing the details. A low camera angle emphasizes height and motion, while a three-quarter view shows the route across the base. Sharing those stages in the work-in-progress gallery can also invite useful feedback before paint makes changes harder.

Practical Choices For A Cleaner Build

  • Make a full-size paper layout before cutting expensive foam.
  • Use separate modules for walls, rails, and damaged slabs.
  • Test every adhesive and primer on leftover material.
  • Leave clear access to feet, stand connectors, and weapon hands.
  • Photograph the base under the same lighting used for the finished kit.

The best result is a base that supports the model’s story without overwhelming it. Foam mats provide the mass, glue creates the structure, and careful texture work turns simple shapes into a believable urban obstacle course. Small choices in height, wear, and camera angle can make a familiar kit feel as though it has just crossed a dangerous battlefield.

When your scene is ready, post the finished build alongside a few construction photos so other builders can study the techniques and adapt them. If you need help with materials, adhesives, or displaying the project, you can contact the team and join the wider Gundam Eclipse conversation.

A member-contributed review of the Moderoid 1/60 SAVAGE CROSSBOW kit, published in the Gundam Eclipse Reviews section. The reviews area hosted 246 topics and roughly 1,400 posts.

PG 00 Gundam

November 4, 2018 — by heathorn

A completed Perfect Grade 00 Gundam build showcased in The Display Case. This section featured approximately 2,200 topics and 24,900 posts, making it one of the forum's largest galleries of finished work.

HG Zeta Gundam Evolution Project

2018 — by kajnrig

An ongoing High Grade Zeta Gundam customization project shared in the Work-in-Progress Thread. This was the most active section on the forum, with roughly 1,400 topics and 34,300 posts where members exchanged feedback and progress updates.