Gundam Eclipse
Cluster of bright red ripe tomatoes on the vine against a blurred green background

A community for builders of all skill levels — share finished builds, works in progress, kit reviews, and stay up to date with forum announcements.

Browse the Display Case

Stay Connected

Get the latest from the Gundam Eclipse community delivered to your inbox.

Latest from the Forum

Gundam Eclipse is Moving!

September 26, 2018 — by tc012009

An important announcement was posted in GE Forum News regarding the future of the community. The forum had accumulated 240 topics and approximately 1,900 posts in its announcements section by this time.

  • Posted in GE Forum News
  • Final recorded announcement in the section

Moderoid 1/60 SAVAGE CROSSBOW

Adding Subtle Panel Line Accents With Enamel Washes

Panel lines are easy to overstate. A black trench running across every armour plate can make a clean Gunpla build look more like a cartoon than a machine exposed to dust, heat and handling. A controlled enamel wash gives those recesses enough contrast to separate parts while preserving the scale and colour of the original plastic.

The technique suits beginners and experienced builders because it is adjustable at every stage. You can use a pre-mixed product, thin your own oil-based wash, or combine several shades for different materials. With a gloss surface, a fine brush and patient cleanup, small mechanical details become visible without turning the model into a collection of dark outlines.

Choose A Wash That Matches The Armour

Pure black is rarely the most convincing choice, especially on white, pale grey or brightly coloured Gundam armour. Dark grey usually creates a softer shadow, while brown-grey can suggest dust and warmer grime around vents, joints and exposed mechanisms. Deep blue-grey works well against cool white mobile suits, and a muted brown can add warmth to desert or ground-use designs.

The aim is tonal separation rather than maximum contrast. Look at the colours already present on the kit and select a wash that sits several values darker. For a Real Grade with densely packed detail, a restrained grey may be enough. On a large Master Grade panel, a slightly stronger mixture can help the geometry read from normal display distance.

If you are working with a kit such as the HGAC Heavyarms review, consider how its broad armour and weapon sections will look together. Large flat panels often benefit from delicate accents, while vents and ammunition-related details can accept a little more depth.

Prepare The Surface Before Applying Enamel

A gloss clear coat is the safest foundation for a flowing wash. Its smooth surface lets the enamel travel through recessed lines and makes excess pigment easier to remove. Allow lacquer or acrylic layers to cure fully before adding enamel; a rushed application can soften paint, stain the surface or lift the colour underneath.

Enamel products contain solvents that can make some plastics brittle, particularly ABS used in inner frames, joints and weapon mechanisms. Avoid flooding movable parts, pegs and stressed connections. When possible, test the wash on a spare runner or hidden section, and keep enamel away from areas that will flex during assembly.

Work in a ventilated space, especially in a closed Melbourne flat during winter or a humid Brisbane hobby room with limited airflow. Australian state workplace-safety rules and product labels provide the practical baseline: follow the manufacturer’s handling advice, keep thinner away from children and use the relevant safety data sheet when a product supplies one.

Apply The Wash In Small Controlled Areas

Load a fine pointed brush with a small amount of diluted enamel and touch it to a panel-line entrance. Capillary action should pull the wash along the recess. If it stops, do not scrub repeatedly; add a second tiny touch at the next point or check whether the line is blocked by moulding residue or an uneven paint layer.

Panel lining is easier when the model is divided into manageable assemblies. Finish one forearm, shoulder or leg section before moving on. This prevents the wash from drying in random places and lets you compare the strength of the effect across both sides. Keep a clean brush nearby for lifting puddles while the wash is still wet.

For organic or damaged surfaces, allow a little irregularity. A perfectly uniform line can look artificial, while a broken accent around a hatch or armour overlap suggests accumulated dirt. Keep the strongest marks near recesses, thrusters and contact points, then reduce the effect across exposed armour.

Remove Excess Without Erasing The Detail

Wait until the wash has become touch-dry but is not fully hardened. Roll a cotton bud lightly dampened with compatible thinner across the panel, following the direction of the surrounding surface. A dry cotton bud can remove a soft haze, while a pointed brush or makeup sponge is useful near raised bolts and sharp corners.

Use very little solvent. Saturating the cotton bud can strip the base coat, spread pigment over the whole part or work thinner into a seam. Replace dirty cotton buds frequently so that removed pigment is not dragged back across a clean panel. If a line becomes too strong, soften only its centre and leave a faint trace at the edges.

Once the result is even, protect it with a clear coat. Satin is a versatile finish for most mobile suits, while matte can make weathered surfaces look convincing. A final gloss or satin layer also unifies painted and unpainted sections, though it may slightly reduce the sharpness of a very delicate wash.

Build Realism With Restraint

Panel lines work best as part of a wider finish. Subtle edge highlights, carefully placed chipping and varied clear colours can support the illusion of scale, but each effect needs room to breathe. Transparent effects deserve their own treatment; the guide on realistic heat warping is useful when you want heat-distressed thrusters or lenses to complement the wash.

Australian builders may also need to adapt products to local availability. Shops in Sydney, Melbourne and Perth often carry Gunpla tools and imported finishing supplies, while regional builders may rely on hobby retailers, group orders or online stock alerts. During hot Adelaide summers or damp coastal weather, store enamel bottles tightly sealed and give painted parts extra curing time.

Bench-Side Checks For A Cleaner Finish

Before applying the wash:

  • Confirm the clear coat has cured completely
  • Test enamel on a spare runner
  • Separate ABS joints from painted armour
  • Mix a shade softer than pure black

While cleaning the model:

  • Use a lightly damp cotton bud
  • Follow the panel direction
  • Replace dirty tools often
  • Leave recessed pigment in place

A Display Case post on Gundam Eclipse is a good way to compare subtle results, while the forum’s work-in-progress spaces can help troubleshoot tide marks, staining or uneven line depth. Sharing close-up photos under neutral light makes advice more useful and helps newer builders see how restrained weathering reads at normal viewing distance.

Take your time, protect the surface between stages and treat every panel line as a shadow rather than a drawing. Post your finished build or work-in-progress on Gundam Eclipse so other builders can see the technique in practice and add their own enamel-wash knowledge to the community.

A member-contributed review of the Moderoid 1/60 SAVAGE CROSSBOW kit, published in the Gundam Eclipse Reviews section. The reviews area hosted 246 topics and roughly 1,400 posts.

PG 00 Gundam

November 4, 2018 — by heathorn

A completed Perfect Grade 00 Gundam build showcased in The Display Case. This section featured approximately 2,200 topics and 24,900 posts, making it one of the forum's largest galleries of finished work.

HG Zeta Gundam Evolution Project

2018 — by kajnrig

An ongoing High Grade Zeta Gundam customization project shared in the Work-in-Progress Thread. This was the most active section on the forum, with roughly 1,400 topics and 34,300 posts where members exchanged feedback and progress updates.