How to Convert a Standard Action Base into a Suspended Flight Display
A standard action base is designed to support a model from below, yet a few careful modifications can turn it into a convincing airborne display. The goal is to create the impression that a mobile suit is banking, launching, or hovering without making the support arm distract from the pose.
This project suits High Grade, Real Grade and lighter Master Grade kits, provided the base and attachment points can handle the finished weight. Before cutting plastic, it helps to compare kit construction and balance; this guide to Gundam grades is useful when deciding how much reinforcement your model may need.
Australian builders also need to account for warm rooms, dusty shelves and strong sunlight through windows. A pose that feels secure during a mild Melbourne afternoon may loosen after a hot summer day in Brisbane, so material choice and testing matter as much as appearance.
The conversion can be inexpensive. A spare action base, brass rod, clear acrylic sheet, heat-shrink tubing and a few hand tools are usually enough. Local hobby shops, model retailers and hardware stores such as Bunnings can provide most supplies without relying on international postage.
Choose the Right Base and Kit
Start with an action base that has a broad footprint and a firm vertical support. Square and hexagonal bases are generally easier to modify than narrow circular stands because they resist tipping when the model is angled. A base with several mounting holes also gives you options for moving the support point during testing.
Select a kit with a strong internal frame or a sturdy backpack connection. A light HG mobile suit is a forgiving first project, while a large MG with heavy weapons may require a thicker support arm and a weighted base. Remove loose beam sabres, shields and optional equipment before establishing the centre of gravity.
Plan the Suspension Geometry
Decide whether the model will appear to hang from a flight support, pivot around its waist, or attach near the backpack. A backpack connection often looks natural for a flying pose, but it can place stress on thin armour parts. A waist connection is stronger on some kits, although it may be more visible.
Sketch the intended angle from the front, side and top. The support should enter the silhouette behind the torso or between thrusters whenever possible. For a banking pose, angle the model slightly toward the viewer rather than rotating it so far that the feet, hands or shoulder armour become difficult to recognise.
Build a Strong Anchor Point
For a removable solution, use a short section of brass tube or a sturdy plastic peg that matches an existing backpack or waist socket. A 2 mm to 3 mm brass rod is suitable for many HG displays, while heavier kits may need a larger diameter or two contact points. Test the fit with tape before applying adhesive.
If the kit has no reliable socket, reinforce the inside of the attachment area with two-part epoxy putty. Let it cure fully, then drill a pilot hole with a pin vice. Avoid forcing a large drill through thin armour, as this can split the part or leave a visible crack on the exterior.
A small metal washer inside the modified base can distribute pressure around the new hole. Use cyanoacrylate sparingly, and remember that Australian summer heat can soften some low-quality plastics and adhesives. Keep the modified base away from direct sun and allow every bonded joint to cure overnight.
Modify the Action Base
Mark the new support position on the base and drill gradually, checking the rod after each pass. The rod should fit snugly without spreading the plastic. If the support arm needs a sharper angle, use a heated plastic rod or add a two-part joint rather than sharply bending a cold piece.
| Support method | Best for | Strength | Visual impact |
|---|---|---|---|
| Clear acrylic rod | Light HG kits | Medium | Very low |
| Brass rod with sleeve | RG and compact MG kits | High | Low |
| Twin rear supports | Heavy MG kits | Very high | Medium |
| Backpack peg adapter | Dynamic flight poses | High | Low when hidden |
Once the geometry works, secure the rod beneath the base with epoxy or a nut-and-washer arrangement. Keep the adhesive away from moving parts and transparent sections. Paint the exposed hardware only after the full assembly has passed its stability tests.
Balance and Hide the Hardware
A suspended display looks more natural when the support point sits close to the mobile suit’s centre of mass. Heavy shields, rifles and fuel tanks can pull the model sideways, so pose those parts near the torso or counterbalance them with the opposite arm. Small changes to limb angles often make a larger difference than adding more hardware.
Clear rod is ideal when the model is displayed against a pale background, while dark-painted brass can disappear behind a shadowed backpack. Heat-shrink tubing can cover a visible metal section and provide a little cushioning. For a cleaner finish, use a removable clear connector that allows the kit to be taken off the base for transport.
Test Stability and Clearances
Perform a low-height test above a soft towel or foam mat. Leave the completed model on the base for several hours, then gently rotate the base and check for sagging, cracking or a slow change in pose. A suspended mobile suit should remain stable when a nearby cabinet door closes or someone walks past the shelf.
Measure clearance around beam effects, rifle barrels and large wings. This is especially important in compact Australian hobby rooms, where display cabinets may sit close to walls. In Sydney or Perth, where dust can quickly collect on open shelves, a clear acrylic cover will protect the pose and reduce cleaning around delicate antennae.
Finish, Photograph and Share
After the structure is proven, sand drilled edges, tidy excess putty and touch up the base. A restrained matte finish helps the support disappear, while a gloss or metallic accent can make the stand look like a launch rig. Add a small warning stripe or technical label if it suits the mobile suit’s setting, but avoid details that compete with the model.
Take photographs from the model’s eye level and from a slightly lower angle. A plain background reveals whether the support is genuinely hidden, while a darker backdrop can emphasise thruster effects. Builders comparing products and materials can also browse these kit reviews before choosing their next display project.
Post the finished suspended flight display in the Gundam Eclipse Display Case, and include work-in-progress photographs showing the reinforcement and attachment method. Sharing the measurements, kit grade and support hardware gives other builders useful information for their own conversions.
A standard action base can become a strong, flexible flight stand with careful drilling, balanced posing and patient testing. Upload your build to the forum, discuss the engineering choices with other members, and help make suspended displays easier for builders across Australia and beyond.