Gundam Eclipse
Cluster of bright red ripe tomatoes on the vine against a blurred green background

A community for builders of all skill levels — share finished builds, works in progress, kit reviews, and stay up to date with forum announcements.

Browse the Display Case

Stay Connected

Get the latest from the Gundam Eclipse community delivered to your inbox.

Latest from the Forum

Gundam Eclipse is Moving!

September 26, 2018 — by tc012009

An important announcement was posted in GE Forum News regarding the future of the community. The forum had accumulated 240 topics and approximately 1,900 posts in its announcements section by this time.

  • Posted in GE Forum News
  • Final recorded announcement in the section

Moderoid 1/60 SAVAGE CROSSBOW

Realistic Water Effects for Amphibious Mobile Suits

An amphibious mobile suit deserves more than a glossy blue base. The right water effect should suggest weight, movement and depth, whether your Z’Gok is wading through a muddy creek or your Acguy is surfacing beside broken harbour concrete. A convincing scene comes from layering transparent materials, restrained colour and small surface details rather than relying on one thick pour of resin.

Scale is the first consideration. At 1/144, a wave only a few millimetres high can look enormous, while at 1/100 you have more room for spray, ripples and submerged terrain. Plan the pose before buying materials, and decide whether the water is calm, fast-moving, shallow or disturbed by the suit’s thrusters.

Plan The Scene Around The Pose

Start with the mobile suit’s contact points. Feet, claws and hands should appear to push against the water, not simply sit on top of it. A Z’Gok stepping from a tidal pool can have water gathered around its ankles, whereas a Hygogg moving at speed needs a V-shaped wake, raised spray and a darker channel behind the body.

Make a quick sketch of the base from above. Mark the suit, the wake direction, submerged rocks and any floating debris. This prevents the common problem of adding attractive ripples that contradict the machine’s movement. A slightly tilted base can make the water feel more active, but keep enough flat area for the model to remain visually dominant.

Select Materials For Scale And Clarity

For the base, acrylic sheet, MDF, foamboard or a shallow wooden plaque will work. Build landforms with extruded polystyrene or modelling putty, then seal porous surfaces before adding water media. In Australia, Bunnings is a convenient source for timber offcuts, clear acrylic and silicone sealant, while hobby shops often carry water-effect gels and realistic resin products.

Clear epoxy resin gives deep water and a polished surface, but it needs careful measuring, ventilation and a level workspace. Acrylic gloss gel is easier to control and suits shallow water, foam and small ripples. Clear UV resin is useful for tiny droplets, though the strong Australian sun can make curing unpredictable if the piece is near a window. Test every product on scrap plastic first.

Build Depth Beneath The Surface

Paint the base before applying anything transparent. Use a dark blue-green or brown-green centre for depth, then fade towards ochre, grey or pale sand near the edges. A little black or dark umber beneath the suit can imply a deeper channel, while pale tan around the feet suggests disturbed sediment.

Add submerged shapes before the final clear layer. Fine gravel, broken plastic, cork fragments and textured plaster can represent rocks, concrete or coral. Keep these details slightly softer and darker than exposed terrain because water reduces contrast. A few small parts from a damaged kit can become half-buried pipes or wreckage, giving the scene a distinctly industrial Gundam character.

Layer Colour Instead Of Tinting Everything

Avoid pouring strongly coloured resin over the entire base. Heavy blue transparency can make the water look like glass or aquarium gravel. Instead, tint the painted substrate, use thin translucent washes and reserve clear medium for the upper layers. Blue-green, grey, brown and milky turquoise can be blended in separate zones to show changing depth.

For a large project, studying large kit guide can help with planning, handling and displaying a substantial build before you commit to a broad scenic base. The same principles apply to water effects: work in manageable stages, protect finished areas and allow each layer to cure fully.

Shape Ripples, Wakes And Spray

Apply gloss gel with a palette knife, old brush or silicone shaper. Pull it away from the feet and claws to create directional ridges, then soften the edges with a damp tool. For a stationary suit, use overlapping oval ripples. For a moving suit, stretch the lines behind it and keep the wake asymmetrical so it does not look stamped on.

Use clear acrylic gel or gloss varnish for small splashes around joints and thrusters. Once dry, add a restrained amount of white paint to the highest edges. Cotton fibres, stretched clear sprue and tiny dots of UV resin can create spray, but they need to remain delicate at model scale. Too much white foam quickly turns water into shaving cream.

Finish The Suit And The Display

Weather the lower legs, claws and skirts with thin brown, green and grey filters. A few muddy deposits around panel lines will connect the machine to the environment, while polished highlights on the upper armour can show water running off the surface. Keep the weathering uneven; amphibious suits are exposed to mud, salt, algae and spray, but every panel should not carry the same mark.

A shadow box can frame the scene dramatically, especially for a night-time harbour or underwater installation. The techniques in this shadow box guide are useful when planning depth, lighting and background contrast. For Australian builders, warm summers in Brisbane, Sydney or Perth can accelerate drying and increase dust, so cover the base while products cure and avoid mixing resin during very humid weather.

Practical Build Recommendations

  • Test resin, gel and varnish on spare runners before applying them to the display.
  • Keep the water colour darker beneath the suit and lighter towards shallow edges.
  • Use directional ripples that match the mobile suit’s feet, claws or thrusters.
  • Add white foam sparingly, concentrating it on impact points and wake crests.
  • Seal the finished base against dust, especially if it will be displayed in a garage or hobby room.

Share progress photographs on Gundam Eclipse as the scene develops, including the dry painted base, first transparent layer and final foam details. Other builders can offer useful scale checks, material alternatives and weathering ideas, while your finished amphibious mobile suit can give the community another practical reference for future dioramas.

A member-contributed review of the Moderoid 1/60 SAVAGE CROSSBOW kit, published in the Gundam Eclipse Reviews section. The reviews area hosted 246 topics and roughly 1,400 posts.

PG 00 Gundam

November 4, 2018 — by heathorn

A completed Perfect Grade 00 Gundam build showcased in The Display Case. This section featured approximately 2,200 topics and 24,900 posts, making it one of the forum's largest galleries of finished work.

HG Zeta Gundam Evolution Project

2018 — by kajnrig

An ongoing High Grade Zeta Gundam customization project shared in the Work-in-Progress Thread. This was the most active section on the forum, with roughly 1,400 topics and 34,300 posts where members exchanged feedback and progress updates.