Gundam Eclipse
Cluster of bright red ripe tomatoes on the vine against a blurred green background

A community for builders of all skill levels — share finished builds, works in progress, kit reviews, and stay up to date with forum announcements.

Browse the Display Case

Stay Connected

Get the latest from the Gundam Eclipse community delivered to your inbox.

Latest from the Forum

Gundam Eclipse is Moving!

September 26, 2018 — by tc012009

An important announcement was posted in GE Forum News regarding the future of the community. The forum had accumulated 240 topics and approximately 1,900 posts in its announcements section by this time.

  • Posted in GE Forum News
  • Final recorded announcement in the section

Moderoid 1/60 SAVAGE CROSSBOW

How To Build A Shelf-Mounted Lighting System For Your Display Case

A well-lit display shelf can turn a collection of Gunpla into a small exhibition, revealing panel lines, metallic finishes and careful weathering that ordinary room light leaves hidden. A practical system does not need to be expensive or permanently wired into the wall. With low-voltage LEDs, tidy cable management and a little planning, you can create even illumination across several shelves.

The best setup balances brightness, heat, colour accuracy and access to your models. That matters in Australia, where a Sydney or Brisbane room can become very warm in summer, and where a display cabinet may sit in a spare room, study or lounge rather than a dedicated hobby space. The goal is attractive lighting that remains safe, serviceable and kind to your builds.

Plan The Shelf

Begin by measuring the internal width, depth and height of each shelf. Note where vertical supports, glass doors and rear panels sit, then sketch a simple route for the power cable. A light strip mounted beneath each shelf usually gives more even coverage than one bright lamp at the top.

Consider how the models will be posed before fixing anything in place. Tall mobile suits may need light mounted towards the front edge, while a deeper shelf benefits from a strip positioned slightly forward of centre. Leave enough clearance for removing a kit without catching it on a diffuser or cable.

Choose Safe Components

For most display cases, 12-volt or 24-volt LED strip lighting is a sensible choice. Look for a neutral white strip around 4000K if you want balanced colours, or cool white around 5000K for a sharper hangar-like appearance. High colour-rendering LEDs are worthwhile when you display painted armour, clear parts and metallic surfaces.

Use an enclosed plug-pack transformer rated for the total wattage of the strips, with a little capacity in reserve. Australian homes use 230–240V mains power, so choose equipment with a compliant Australian plug rather than adapting an overseas unit. Bunnings, Jaycar and specialist lighting suppliers commonly stock low-voltage options, connectors and aluminium channels.

Measure And Mount

Cut LED strip only at its marked cutting points, then attach it to clean, dry surfaces. Adhesive backing can loosen in a warm room, so add small clips, neutral-cure silicone or mechanical brackets where appropriate. Avoid ordinary double-sided tape near hot windows or in areas affected by dust.

An aluminium LED channel with a translucent diffuser creates a cleaner finish and softens harsh hotspots. Mount the channel underneath the shelf, set slightly behind the front edge so it is not visible at eye level. If the shelves are glass, use removable clips or adhesive mounts designed for glass instead of drilling.

Wire The System

Plan for a single concealed feed wherever possible. LED strips can be connected in parallel from a distribution point, reducing the voltage drop that may cause the far end of a long strip to look dimmer. Label each lead before installation and test every section on the bench.

A small inline dimmer or remote controller makes the system easier to live with. Route cables down the rear corner using adhesive cable clips, then hide the main lead behind the case or in a surface raceway. Keep low-voltage wiring separate from moving doors, sharp metal edges and any cable carrying mains electricity.

Control Glare And Colour

Light aimed directly at glass can create reflections that obscure the models. Diffusers help, but the mounting angle matters just as much. Tilt the strip slightly towards the rear or use a shallow side-mounted channel to illuminate the subject without shining straight into the viewer’s eyes.

Keep colour temperature consistent between shelves so white armour does not appear blue on one level and yellow on another. Neutral white is a reliable choice for a mixed Display Case collection, while a subtle blue accent can suit a space-themed scene when used at low brightness.

Protect The Models

LEDs produce far less heat than halogen or incandescent bulbs, but the power supply and enclosed channels still need ventilation. Do not cover a transformer with foam, fabric or loose paperwork. In Australia’s hotter months, particularly in inland areas or west-facing rooms, check that the cabinet does not become noticeably warmer after several hours.

Dust control is equally important. Seal gaps where practical, clean diffusers with a soft microfibre cloth and avoid spraying cleaner inside the cabinet. For battle-worn projects, plan the lighting after finishing delicate effects; a battle damage guide can help you create convincing texture without placing heat or tools near completed models.

Tune The Display

Install one shelf at a time and photograph the result from normal viewing height. Images quickly reveal dark corners, reflected hotspots and areas where a backpack or shield blocks the beam. Adjusting the strip by a few centimetres can make a bigger difference than increasing brightness.

A dimmer also helps match the display to the room. Bright lighting suits a daytime build showcase, while a lower setting creates depth during evening viewing. Once the arrangement works, share the finished result in the Display Case, where other builders can compare layouts and offer practical suggestions.

Lighting choice Best use Advantages Watch-outs
Neutral white LED strip Mixed Gunpla collections Natural colour and broad versatility Less dramatic than cool white
Cool white LED strip Space or hangar scenes Crisp, technical appearance Can make white plastic look bluish
Aluminium channel with diffuser Front-facing shelves Even light and reduced glare Costs more and needs careful mounting
Individual puck lights Small cabinets or single kits Simple installation and directed beams More visible hotspots
Dimmable 12V system Multi-shelf displays Flexible brightness and easy control Requires a correctly rated power supply

A carefully planned shelf-mounted lighting system makes a display case easier to view, photograph and maintain. Start with one shelf, use safe low-voltage components, and refine the position before expanding across the cabinet. For inspiration when planning a classic mobile suit display, the MG Gundam Mk II review shows why strong lighting can bring surface detail and proportions to life.

Share your finished lighting setup, wiring tricks and display photos with the Gundam Eclipse community so other builders can learn from your build.

A member-contributed review of the Moderoid 1/60 SAVAGE CROSSBOW kit, published in the Gundam Eclipse Reviews section. The reviews area hosted 246 topics and roughly 1,400 posts.

PG 00 Gundam

November 4, 2018 — by heathorn

A completed Perfect Grade 00 Gundam build showcased in The Display Case. This section featured approximately 2,200 topics and 24,900 posts, making it one of the forum's largest galleries of finished work.

HG Zeta Gundam Evolution Project

2018 — by kajnrig

An ongoing High Grade Zeta Gundam customization project shared in the Work-in-Progress Thread. This was the most active section on the forum, with roughly 1,400 topics and 34,300 posts where members exchanged feedback and progress updates.