Gundam Eclipse
Cluster of bright red ripe tomatoes on the vine against a blurred green background

A community for builders of all skill levels — share finished builds, works in progress, kit reviews, and stay up to date with forum announcements.

Browse the Display Case

Stay Connected

Get the latest from the Gundam Eclipse community delivered to your inbox.

Latest from the Forum

Gundam Eclipse is Moving!

September 26, 2018 — by tc012009

An important announcement was posted in GE Forum News regarding the future of the community. The forum had accumulated 240 topics and approximately 1,900 posts in its announcements section by this time.

  • Posted in GE Forum News
  • Final recorded announcement in the section

Moderoid 1/60 SAVAGE CROSSBOW

Using a Heat Gun to Soften and Bend Polyキャps for Custom Poses

A heat gun can turn a stiff, limiting polycap joint into a useful tool for custom posing. By warming the socket or collar carefully, builders can introduce a small curve, adjust an angle, or create clearance for a dynamic stance without replacing the entire joint.

The method is especially useful when a Gundam kit looks excellent in the manual pose but feels restricted in a diorama or Display Case scene. It suits experienced builders, yet beginners can achieve reliable results by working slowly, using low heat, and testing the fit repeatedly.

Understanding What Heat Does

Polycaps are flexible joint parts, usually made from a rubbery thermoplastic that becomes more pliable when warmed. The aim is not to melt the part. You only need enough heat to relax the material so it can be shaped around a temporary form or held at a new angle.

Different kits respond differently, particularly across HG, RG, and MG designs. Before modifying a valuable or complex build, compare the construction approach in this guide to Gundam grade differences. A spare polycap from the same runner is ideal for a first test.

A standard workshop heat gun can produce far more heat than the part requires. Use its lowest setting, keep it moving, and begin from a generous distance. A hair dryer is slower but often safer for small parts, especially when you are still learning how quickly the material reacts.

Preparing A Safe Work Area

Work on a ceramic tile, metal tray, or another heat-resistant surface rather than directly on a cutting mat. Remove nearby runners, decals, paints, tissues, and solvents. Even a brief blast can warp plastic armour or ignite clutter around the bench.

Australian mains power is 240 volts, so use a suitable locally sold tool and avoid improvised adapters. Heat guns are easy to find at Bunnings and similar hardware shops, but a compact craft model with adjustable temperature is preferable to a high-powered stripping gun.

Ventilation matters. Open a window or use extraction, particularly in a small hobby room in Sydney, Melbourne, or Brisbane. Do not lean over the part while heating, and let the tool cool on a stable surface before packing it away.

Shaping The Polycap Gradually

Install the polycap on a temporary peg, a spare runner section, or the actual joint if the surrounding armour can tolerate the heat. Warm the part with short passes, rotating it so one area does not receive all the heat. After a few seconds, gently press it against a curved former or hold the desired bend with tweezers.

The best modification is usually subtle. A small change to a hip socket, ankle collar, or shoulder joint can improve balance and create a convincing action pose. Forcing a dramatic bend while the plastic is soft can thin the wall, distort the opening, or make the joint permanently loose.

Keep checking the fit as the part cools. Thermoplastic can spring back slightly, so allow it to reach room temperature before judging the final angle. If the result is insufficient, repeat the process instead of applying a much hotter blast.

Using Jigs And Joint Supports

A simple jig makes the result more consistent. Use stacked styrene scraps, Blu Tack, alligator clips, or a custom block to hold the polycap at the angle you want while it cools. Cover metal clips with tape or heat-resistant material so they do not mark the softened surface.

For a bent ankle or hip, support the joint from both sides rather than squeezing one edge. This preserves the circular opening and helps the modified part continue gripping its peg. If the socket becomes too loose, a thin coat of floor polish or a carefully fitted shim may restore friction after the part has fully cooled.

Avoid bending a polycap while it is trapped between painted armour pieces. Heat can soften nearby paint, cloud clear parts, or leave pressure marks. Remove the insert whenever practical, and protect completed surfaces with masking tape.

Matching Custom Poses To Kit Construction

A modified polycap should support the pose, not fight the kit’s engineering. Check armour movement, internal frame stops, cable parts, and the length of the opposite limb. A slightly opened hip may improve a kneeling pose, while an angled ankle can make a mobile suit appear grounded rather than balanced on its toes.

Builders working with older HG kits may find that a small socket adjustment gives more value than extensive scratch-building. With an RG or MG, inspect the frame first; the apparent restriction may come from an armour panel or locking tab rather than the polycap itself.

Australian hobbyists often work around limited local stock and postage delays, so preserving the original part can be useful when replacement polycaps are difficult to source. Keep the altered piece reversible where possible, and label spare parts rather than discarding them.

Checking The Result And Sharing It

Test the finished pose on the actual display base, not just in your hand. Vibrations from a shelf, uneven flooring, or the weight of a weapon can reveal a weak joint that seemed stable at the bench. For Australian homes, also remember that a hot summer hobby room can make some plastics and adhesives feel softer than usual.

Photograph the model from several angles and record the heat setting, distance, and approximate warming time. These notes make the technique repeatable and help other builders avoid overheating their parts. A short comparison between the original and modified stance is especially useful in a work-in-progress post on the WIP forum.

Share successful bends, failed experiments, and safe temperature practices with the Gundam Eclipse community. If a joint has warped badly or a tool has caused damage, use the site’s contact page for site-related assistance, then post the repair process so other builders can learn from it.

Start with a spare polycap, a low heat setting, and a modest pose adjustment. Upload the before-and-after photos to the forum or Display Case, include your tool and timing notes, and help build a practical reference for builders across Australia.

A member-contributed review of the Moderoid 1/60 SAVAGE CROSSBOW kit, published in the Gundam Eclipse Reviews section. The reviews area hosted 246 topics and roughly 1,400 posts.

PG 00 Gundam

November 4, 2018 — by heathorn

A completed Perfect Grade 00 Gundam build showcased in The Display Case. This section featured approximately 2,200 topics and 24,900 posts, making it one of the forum's largest galleries of finished work.

HG Zeta Gundam Evolution Project

2018 — by kajnrig

An ongoing High Grade Zeta Gundam customization project shared in the Work-in-Progress Thread. This was the most active section on the forum, with roughly 1,400 topics and 34,300 posts where members exchanged feedback and progress updates.