Gundam Eclipse
Cluster of bright red ripe tomatoes on the vine against a blurred green background

A community for builders of all skill levels — share finished builds, works in progress, kit reviews, and stay up to date with forum announcements.

Browse the Display Case

Stay Connected

Get the latest from the Gundam Eclipse community delivered to your inbox.

Latest from the Forum

Gundam Eclipse is Moving!

September 26, 2018 — by tc012009

An important announcement was posted in GE Forum News regarding the future of the community. The forum had accumulated 240 topics and approximately 1,900 posts in its announcements section by this time.

  • Posted in GE Forum News
  • Final recorded announcement in the section

Moderoid 1/60 SAVAGE CROSSBOW

Building The MG Kyrios For Reliable Transformation

The MG Kyrios is an impressive Master Grade kit, combining sharp proportions with a transformation system that shifts between mobile suit and flight mode. Its moving armour, folding legs and compact aircraft profile make it rewarding to build, though the finished model benefits from careful handling rather than force.

For Australian builders, the kit may spend time travelling through the post, sitting on a compact apartment workbench or waiting through a warm summer afternoon before assembly begins. A patient build process helps protect the plastic, preserve the joints and make each transformation safer.

Understanding The Transformation System

Before cutting parts, study the manual’s transformation sequence and identify which assemblies move together. The shoulders, waist, hips, knees and feet all contribute to the changeover, so treating the Kyrios as a collection of independent hinges can place stress on the wrong section.

The flight mode is achieved through several controlled folds rather than a single dramatic motion. Keep the torso aligned, move the arms into their intended channels and make sure the legs are positioned symmetrically. If a panel refuses to close, return to the previous step instead of pressing harder.

Preparing Parts For Smooth Movement

A test fit is especially valuable around the hips, shoulders and backpack connection. Remove obvious mould-line interference with a fine hobby knife or sanding stick, taking only a small amount of material at a time. The essential model tools can make this preparation more controlled and reduce accidental gouges.

Do not apply paint or topcoat to friction surfaces without checking the fit first. Even a thin layer can make a snug joint too tight, particularly in warm Australian conditions where a closed room or sunny desk may soften some finishes. Mask pegs and sockets where necessary, and allow painted parts to cure fully.

Building The Core In Stages

The inner frame should be assembled with attention to orientation. Kyrios has several parts that look similar from the front, while their locating tabs work in only one direction. Compare each piece with the manual and inspect the completed subassembly from multiple angles before moving on.

Build the torso, hips and legs as separate checkpoints rather than rushing through the entire frame. Confirm that the waist rotates, the knees bend freely and the ankles have enough range for both standing and flight configurations. A short pause after each checkpoint can prevent a hidden reversed part from affecting the final transformation.

Managing Armour And Clearances

Armour panels should move with a light, deliberate pressure. Hold the strongest section close to the hinge instead of squeezing a thin edge, and use both hands when folding larger assemblies. This spreads the load across the frame and helps keep the panel lines crisp.

Pay close attention to the shoulder armour and leg sections, where adjacent pieces can catch during the transition. Move one side at a time during the first few transformations, then repeat the sequence with matching pressure on both sides. The goal is a repeatable motion that does not scrape decals or stress small tabs.

Bench Checks Before Flight Mode

A few simple checks can make the first transformation far less intimidating.

  • Confirm every hinge moves before attaching delicate armour
  • Mark unusually tight joints for light sanding
  • Keep the manual open beside the work area
  • Photograph the completed mobile suit before changing it

When working in a Sydney or Melbourne flat, use a tray to contain small parts and protect them from disappearing under furniture. Builders in drier inland areas may notice static attracting dust, while coastal hobbyists should store the kit away from persistent humidity. A lidded parts box and clean cotton gloves are useful everyday safeguards.

For paint, cement and spray products, follow the product label and local disposal rules. Good ventilation matters in any home workshop, especially where the workbench shares a room with living spaces. Australian Consumer Law may assist with faulty purchases, but damage caused by forced assembly or unsuitable finishing products is generally a hobbyist’s responsibility.

Displaying The Kyrios In Flight

Flight mode looks strongest when the model is supported without forcing the underside. Check the action base connection carefully and keep the centre of gravity over the stand. If the pose leans, adjust the hips and backpack rather than tightening every joint.

A clear stand can make the aircraft silhouette easier to appreciate, while a darker base can emphasise the orange and white colour scheme. Avoid placing the completed kit in direct Queensland or Western Australian sun, where heat and ultraviolet exposure can fade colours and make some plastics more brittle over time.

Reviewing The Finished Build

Once the Kyrios has been transformed several times, inspect the joints for whitening, loosened pegs or stress marks. These signs do not always mean the kit is damaged, but they indicate that a hinge needs gentler movement or a small fit adjustment. Keep a note of any troublesome step for future builds.

A useful review should cover assembly quality, poseability, transformation ease and display stability rather than focusing only on appearance. Comparing your experience with other builders through community kit reviews can reveal alternate approaches to panel lining, decals and joint maintenance.

Mobile Suit And Flight Mode At A Glance

Feature Mobile Suit Mode Flight Mode
Main strength Strong character pose and articulation Sleek silhouette and dynamic display
Key concern Stability through the hips and ankles Clearance between folded armour panels
Best handling method Support the torso and waist Move assemblies in the manual’s sequence
Display priority Balanced stance or action pose Secure action base connection
Maintenance check Joint tightness Tabs, hinges and underside alignment

Set aside time for both configurations rather than treating flight mode as a final afterthought. The MG Kyrios rewards builders who learn its movement pattern, and each careful transformation makes the next one faster and more predictable.

Share your completed Kyrios, work-in-progress photographs or transformation tips in the Gundam Eclipse Display Case and forum. Your notes may help another builder protect a tight hinge, solve a difficult panel fit or find a better way to present the finished flight mode.

A member-contributed review of the Moderoid 1/60 SAVAGE CROSSBOW kit, published in the Gundam Eclipse Reviews section. The reviews area hosted 246 topics and roughly 1,400 posts.

PG 00 Gundam

November 4, 2018 — by heathorn

A completed Perfect Grade 00 Gundam build showcased in The Display Case. This section featured approximately 2,200 topics and 24,900 posts, making it one of the forum's largest galleries of finished work.

HG Zeta Gundam Evolution Project

2018 — by kajnrig

An ongoing High Grade Zeta Gundam customization project shared in the Work-in-Progress Thread. This was the most active section on the forum, with roughly 1,400 topics and 34,300 posts where members exchanged feedback and progress updates.