Gundam Eclipse
Cluster of bright red ripe tomatoes on the vine against a blurred green background

A community for builders of all skill levels — share finished builds, works in progress, kit reviews, and stay up to date with forum announcements.

Browse the Display Case

Stay Connected

Get the latest from the Gundam Eclipse community delivered to your inbox.

Latest from the Forum

Gundam Eclipse is Moving!

September 26, 2018 — by tc012009

An important announcement was posted in GE Forum News regarding the future of the community. The forum had accumulated 240 topics and approximately 1,900 posts in its announcements section by this time.

  • Posted in GE Forum News
  • Final recorded announcement in the section

Moderoid 1/60 SAVAGE CROSSBOW

A guide to protecting your models with topcoat finishes

A carefully applied topcoat does more than change a Gunpla’s appearance. It creates a protective barrier against handling, dust, fingerprints, and light surface wear while giving the plastic a consistent finish. Gloss, semi-gloss, and matte clear coats each produce a different visual effect, so the right choice depends on the style and purpose of your build.

Topcoating is also one of the easiest ways to make a kit look complete. It can soften the contrast between different plastic textures, deepen panel lining, and give decals a more integrated appearance. With suitable preparation and controlled application, builders at any skill level can achieve a clean result.

Choose the finish for the effect

Gloss topcoat produces a smooth, reflective surface that suits polished mobile suits, metallic details, and kits inspired by automotive or high-tech designs. It is also useful beneath waterslide decals because the slick surface helps reduce silvering, the cloudy outline that can appear around a decal.

A matte finish removes shine and gives armor a subdued, realistic appearance. It works especially well for military-inspired designs, weathered builds, and machines intended to look used in combat. Semi-gloss sits between the two, preserving some color depth while reducing harsh reflections.

The sheen can also guide your display choices. A glossy model may stand out under bright cabinet lighting, while a matte finish often looks more natural in photography. Consider the kit’s color scheme, decals, and intended pose before choosing a clear coat.

Prepare the surface before spraying

Remove mold-release residue, skin oils, and sanding dust before applying any protective layer. Wash runners or completed parts with mild dish soap and water, then let them dry completely. Handle cleaned pieces with gloves or clean tweezers to avoid transferring oil back onto the plastic.

Complete painting, panel lining, and decal application before the final topcoat. Enamel washes and decal solutions need adequate time to cure, since spraying too soon can disturb the underlying work. If the model includes painted details, test the product on a spare part or runner first.

Separate armor pieces where possible. Spraying a fully assembled kit can leave uncoated areas around joints and create unwanted buildup in hinges. Parts mounted on skewers or clips are easier to rotate, inspect, and coat evenly.

Understand clear-coat compatibility

Topcoats may be lacquer-based, acrylic-based, or water-based. The chemistry matters because a strong solvent can reactivate paint underneath, especially when the lower layer has not cured thoroughly. Follow the manufacturer’s directions and avoid assuming that products from different ranges are automatically compatible.

A safe general approach is to apply the mildest product over a fully cured base, then build up thin layers. When using lacquer products, work in a ventilated space and wear suitable respiratory protection. Never spray near flames, heat sources, food, or unprotected electronics.

Finish type Visual result Useful for Main caution
Gloss Bright and reflective Decals, metallics, polished armor Shows fingerprints and surface flaws
Semi-gloss Moderate sheen General display builds May look uneven over heavily textured parts
Matte Flat and subdued Realistic, military, or weathered styles Can frost in humid or cold conditions

Apply thin, controlled layers

Shake or mix the product thoroughly, then spray a light mist coat from the recommended distance. The first pass should look slightly translucent rather than wet. Allow it to flash off before adding another layer, reducing the risk of runs, pooling, and cloudy patches.

Keep the can or airbrush moving before pulling the trigger and continue moving after releasing it. Use parallel passes rather than aiming at one spot. Rotate the part gradually so edges, recessed armor, and raised details receive consistent coverage without collecting excess clear coat.

Humidity and temperature affect the final appearance. High moisture can cause matte products to turn hazy, while cold conditions may produce rough or slow-drying coats. A test spray on spare plastic reveals problems before they reach the finished model.

Protect joints, clear parts, and details

Topcoat can add thickness to ball joints, polycaps, and sliding mechanisms. Mask friction surfaces or leave those parts uncoated when a tight fit is important. After the finish cures, test articulation slowly rather than forcing a joint that may have become more rigid.

Clear armor, camera lenses, and transparent effect parts usually look best without a matte layer. Mask them carefully or attach them after spraying. Metallic surfaces may lose their sparkle under flat coats, so use gloss selectively and reserve matte protection for surrounding armor.

For dynamic displays, a secure stand reduces the need to handle the model. Builders creating airborne poses can find useful ideas in this flying pose guide, especially when planning support points before the final finish is applied.

Let the coating cure fully

A surface that feels dry may still be soft underneath. Leave freshly coated parts in a clean, covered area for the time stated by the manufacturer. Avoid assembling tight joints, applying decals, or placing the model in a display case until the coat has hardened.

If dust lands on a wet finish, do not wipe it away. Let the area cure, then assess whether gentle polishing or another thin layer can correct it. Rushing to repair a soft surface often creates fingerprints and uneven texture.

Store unused cans and bottles according to their labels, and keep completed models away from direct sunlight and strong heat. UV exposure can discolor some paints and decals over time, while frequent handling gradually transfers oils onto even well-protected surfaces.

Build a repeatable finishing routine

A consistent process makes topcoating less intimidating. Plan the finish during the build, test compatibility on spare plastic, and keep notes about the product, spray distance, drying time, and weather conditions. Those details make it easier to repeat a successful result on future kits.

When selecting tools, paints, and consumables, compare product specifications rather than buying solely by price. A list of trusted supply stores can help builders locate clear coats, masking materials, clips, and replacement tools suited to their workflow.

Practical habits for a cleaner finish

  • Wash and dry parts before painting or topcoating.
  • Test every new product on a spare runner or hidden surface.
  • Apply several light passes instead of one heavy coat.
  • Mask joints, clear parts, and areas that must remain friction-free.
  • Record the product and conditions used for successful builds.

A well-protected model deserves to be seen from every angle. Share your finished kit, compare gloss levels, and document your process in the work-in-progress area so other Gundam Eclipse members can learn from the result and help refine the next build.

A member-contributed review of the Moderoid 1/60 SAVAGE CROSSBOW kit, published in the Gundam Eclipse Reviews section. The reviews area hosted 246 topics and roughly 1,400 posts.

PG 00 Gundam

November 4, 2018 — by heathorn

A completed Perfect Grade 00 Gundam build showcased in The Display Case. This section featured approximately 2,200 topics and 24,900 posts, making it one of the forum's largest galleries of finished work.

HG Zeta Gundam Evolution Project

2018 — by kajnrig

An ongoing High Grade Zeta Gundam customization project shared in the Work-in-Progress Thread. This was the most active section on the forum, with roughly 1,400 topics and 34,300 posts where members exchanged feedback and progress updates.