Gundam Eclipse
Cluster of bright red ripe tomatoes on the vine against a blurred green background

A community for builders of all skill levels — share finished builds, works in progress, kit reviews, and stay up to date with forum announcements.

Browse the Display Case

Stay Connected

Get the latest from the Gundam Eclipse community delivered to your inbox.

Latest from the Forum

Gundam Eclipse is Moving!

September 26, 2018 — by tc012009

An important announcement was posted in GE Forum News regarding the future of the community. The forum had accumulated 240 topics and approximately 1,900 posts in its announcements section by this time.

  • Posted in GE Forum News
  • Final recorded announcement in the section

Moderoid 1/60 SAVAGE CROSSBOW

Build A Custom Pegboard Setup For Gundam Bench Organisation

A well-planned pegboard can turn a crowded Gundam workbench into a clear, adaptable workspace. Paint bottles, side cutters, sanding sticks and hobby knives stay visible, while the bench itself remains free for assembling and photographing kits.

For Australian builders, the ideal arrangement also needs to suit real homes. A compact board works well in a Sydney apartment, while a garage in Adelaide or Perth may offer more room but greater heat and dust. The goal is a flexible storage system that supports painting, detailing, repairs and display preparation.

A custom pegboard setup does not need to be expensive. A board from Bunnings, a few hooks, small shelves and labelled containers can create a useful hobby station. Measure first, allow safe ventilation for paints and solvents, and build the layout around the tools you actually reach for every session.

Design Around Your Bench

Start by measuring the wall, desk and chair clearance. Leave enough space to move your arms comfortably when cutting runners or airbrushing, and avoid placing the board where a hanging tool could interfere with a monitor, lamp or spray booth. In a small Melbourne room, a narrow vertical board may be more practical than a wide panel.

Divide the pegboard into working zones. Keep frequently used tools between shoulder and waist height, paints in a central viewing area, and rarely used accessories near the edges or higher up. A simple left-to-right workflow might run from cutting, to cleaning, to sanding, to painting and final inspection.

Use a paper template or masking tape on the wall before drilling. This makes it easier to test the position of shelves and hooks without committing to holes. For rented properties, consider a freestanding frame or a board fixed to a sturdy backing panel rather than attaching directly to plaster.

Map Your Paint Collection

Sort paints by function before buying storage. Separate primers, lacquers, acrylics, metallics, clear coats and weathering products, then group colours by brand or project. Angled shelves let you read labels quickly, while shallow trays prevent small bottles from disappearing behind larger containers.

Paint racks are useful for everyday colours, but sealed tubs are better for backup stock and seasonal projects. Australia’s warm summers can affect paints, thinners and adhesives, particularly in an uninsulated shed. Store products away from direct sun and heat, and follow each manufacturer’s directions for temperature, ventilation and disposal.

Use colour dots or handwritten labels on shelf edges to identify bottles from above. A small “current build” tray can hold the paints for one mobile suit, keeping a desert scheme or custom colour palette separate from the main collection. This reduces bench clutter and makes it easier to resume a project after a busy week.

Build Hooks And Tool Zones

Choose hooks according to the tool, not the packaging. Double hooks can hold sprue cutters, tweezers and files, while small baskets suit sanding sponges, masking tape and spare blades. A magnetic strip can keep steel rulers and craft scissors accessible, but sharp tools should be positioned securely and away from children or pets.

Give each tool a defined return point. Outline its shape on a backing card or use a small label beneath the hook. This visual system exposes missing items immediately and prevents duplicate purchases when a tool is simply buried under instruction sheets.

A removable shelf is valuable for cutting mats, bottles and cleaning jars. If you use an airbrush, keep the compressor and hose low, allowing the hose to rise without crossing the main assembly area. For gap work, a dedicated filler tray can keep applicators and sanding materials together; these putty filling tips are useful when planning that repair zone.

Make Safety Part Of The Layout

Good organisation should support safe habits. Keep hobby knives in a closed holder, dispose of used blades in a rigid container, and store solvent products upright with their lids firmly closed. Work Health and Safety guidance in Australia places importance on suitable ventilation and safe handling of hazardous substances, so a pegboard should complement—not replace—proper workshop controls.

Do not hang heavy bottles from weak hooks or overload a board fixed to plasterboard. Use suitable wall anchors or mount the pegboard to timber studs, and check the manufacturer’s load rating. A fire risk can increase when flammable liquids, electrical equipment and heat sources are crowded together, so keep thinners and aerosol products separated from lamps, soldering irons and compressors.

For airbrushing, position the spray booth near an appropriate exhaust route and keep the pegboard outside the direct overspray area. A cleanable plastic panel behind the bench can protect the wall from paint mist. In Queensland or the Northern Territory, where heat and humidity can be significant, regular cleaning also helps prevent dust and residue building up on exposed tools.

Keep Projects Easy To See

A project rail or dedicated section makes work-in-progress builds easier to manage. Use shallow trays for loose armour parts, labelled zip bags for subassemblies and a clipboard for colour notes. This prevents a half-built Gundam from competing with everyday tools for bench space.

Reserve one small area for references: kit instructions, masking diagrams, paint tests and printed photographs. A phone stand can serve the same purpose without using wall space. Members can also document progress in the work-in-progress area, where feedback may help solve construction or finishing problems.

The display side of the hobby can influence the storage plan. If you build weathered, desert-themed customs, keep pigments, texture pastes and dusty earth colours near the finishing zone. The community’s desert custom builds offer useful inspiration for arranging those materials by effect rather than by brand.

Compare Storage Options

The best system balances access, capacity and the amount of wall space available. A pegboard is especially useful when your collection changes frequently, since hooks and shelves can be moved without rebuilding the entire station.

Storage option Best suited to Main advantage Watch out for
Pegboard with hooks Mixed tools and changing projects Highly adjustable and visible Needs secure wall mounting
Paint rack shelves Frequently used bottles Fast colour identification Can consume depth and bench space
Drawer organiser Blades, bits and small parts Keeps dust-sensitive items enclosed Contents are less visible
Magnetic strip Metal rulers and scissors Quick access with minimal space Not suitable for every tool
Mobile trolley Shared or temporary workspaces Rolls away after a session Can become cluttered without labels

Combine formats rather than forcing everything onto the board. Keep daily tools open, specialist equipment in drawers and active project materials in a tray. This creates a cleaner distinction between storage and the tools currently in use.

Practical Recommendations

A reliable setup can be built gradually, starting with the tools that create the most clutter. Review the arrangement after several builds and move hooks when your workflow changes.

  • Mount the board at a comfortable standing and seated height.
  • Group paints by project, finish or colour family using clear labels.
  • Keep sharp tools, solvents and blades secured and clearly separated.
  • Add a dedicated tray for the current kit and its loose parts.
  • Leave expansion space for new tools, paints and display accessories.

A pegboard should make the next modelling session easier to begin. With clear zones, safe storage and room to adapt, your bench can support everything from a straight build to a heavily weathered custom without becoming chaotic.

Share photographs of your finished workstation, storage experiments and clever tool solutions with the Gundam Eclipse community. Your setup may give another builder the idea that transforms their own bench.

A member-contributed review of the Moderoid 1/60 SAVAGE CROSSBOW kit, published in the Gundam Eclipse Reviews section. The reviews area hosted 246 topics and roughly 1,400 posts.

PG 00 Gundam

November 4, 2018 — by heathorn

A completed Perfect Grade 00 Gundam build showcased in The Display Case. This section featured approximately 2,200 topics and 24,900 posts, making it one of the forum's largest galleries of finished work.

HG Zeta Gundam Evolution Project

2018 — by kajnrig

An ongoing High Grade Zeta Gundam customization project shared in the Work-in-Progress Thread. This was the most active section on the forum, with roughly 1,400 topics and 34,300 posts where members exchanged feedback and progress updates.